Posted on Leave a comment

The Impact Of Water Damage On Smartphones And How To Fix It

Water damage on smartphones? Water damage is a common problem for many smartphone users, and can have significant impacts on the device’s performance and longevity. If a smartphone is exposed to water, it can cause serious damage to the internal components, leading to issues such as a malfunctioning touch screen, dead battery, or even a complete failure of the device.

In this article, we will discuss the impacts of water damage on smartphones and how to fix it.

What are the impacts of water damage on smartphones?

There are several ways in which water can damage a smartphone. The most common is accidental exposure, such as dropping the phone into water or spilling liquid on it. These damages leave behind severe impacts, such as: 


When water gets inside the internal parts of the mobile, it can cause corrosion of internal components and damage to the motherboard.

Short circuits

A short circuit is a connection between two points of a circuit that should not be connected. When a mobile device is exposed to water, the water can seep into the device and cause a short circuit. This can lead to a device malfunction or even a complete breakdown of the device.

Battery damage

If water gets inside the battery, it can corrode the electrical contacts and cause a short circuit, preventing the battery from charging or discharging correctly. Moreover, if the battery’s casing is compromised, water can seep inside and cause irreversible damage to the cells. In a nutshell, water can severely damage the battery, reducing its lifespan and causing it to malfunction.

Display damage

Water can lead to display damage on mobiles when it becomes trapped inside the device.  It can cause discolouration, dead pixels, or even a complete display failure.

Speaker and microphone damage

When water comes into contact with a microphone or speaker, it can cause electrical damage to the components. This is because water is a conductor of electricity, which can cause a short circuit in the circuits of the microphone and speaker. This can lead to permanent damage to the microphone and speaker and can cause the phone to malfunction.

How to fix water damage on smartphones?

To avoid water damage, it’s important to keep your smartphone away from water and liquids as much as possible. If you do get water on your phone, it’s important to act quickly to minimise the damage. The first step is to turn off the device and remove the battery if possible. This helps to prevent short circuits and electrical damage.

Remove the battery

If your smartphone has come into contact with water, the first thing to do is to remove the battery. This will prevent further damage from occurring.

Dry the device

You can use a clean cloth or paper towels to gently blot the phone, and then use a dry cloth to remove any remaining moisture. If you have access to a desiccant, such as silica gel, you can use it to help absorb any remaining moisture.

Visit a repair shop

If your phone has suffered water damage, it’s important to get it repaired as soon as possible. In some cases, you may be able to fix the damage yourself. For example, if the battery has died, you may be able to replace it with a new one. However, in many cases, it’s best to take your phone to a professional repair shop.


It’s common sense to keep your phone away from water. However, in the event that your phone does get wet, it’s crucial to act quickly and seek professional repair to minimise any damage.

With the right assistance, you’ll be able to get back to using your phone for texting and browsing the internet in no time. Don’t hesitate to take action now and protect your smartphone from the detrimental effects of water.

At Fixsmart, we’re experts in fixing gadget issues. Contact us for all your repair needs.

Posted on Leave a comment

How to Replace a Damaged Smartphone Display or Other Hardware Components

Have you ever dropped your smartphone and ended up with a shattered screen or malfunctioning components? It can be frustrating and costly to get it repaired by a professional. However, if you are someone who enjoys tinkering with electronics and wants to learn how to replace damaged smartphone components yourself, you’ve come to the right place.

Even if you’ve invested in the most high-end smartphone on the market, accidents can happen, and it’s essential to know how to repair your device if something goes wrong. In this guide, we will explore step-by-step instructions on how to replace damaged parts of your phone, but keep in mind that seeking professional help is always the best option for a complex repair.


Replacing a damaged smartphone display is not as difficult as it may seem. It requires some basic knowledge and tools, but with the right guidance and proper care, anyone can do it. Here are the steps to follow in order to successfully complete this task:

1. Get the right tools: The first step is to acquire the necessary tools for the job. This includes a screwdriver, a pry tool, a suction cup, and a replacement display. If your phone has a display adhesive, you may need a heat gun too.

2. Disassemble the phone: Once you have the necessary tools, you can begin the disassembly process. This involves unscrewing the back panel, removing the battery, and then using the pry tool to carefully detach the display from the chassis.

3. Remove the old display: With the display detached, you can now remove the old display. Carefully peel off any adhesive and make sure not to damage any other components in the process.

4. Replace the display: Take the new display and attach it to the chassis with the adhesive. If your phone requires a heat gun, then you will need to use it now. Once the display is secured, you can reassemble the phone.

5. Test the display: Finally, you can power on the phone and test the new display for proper function. If everything works, then you can consider the project a success.

With these steps, you should be able to replace a damaged smartphone display without too much difficulty. Make sure to take your time and be careful throughout the process to avoid any mistakes.


Before beginning the repair, make sure to power off the phone and disconnect any charging cable or headphones.

First, you need to remove the back of the phone. This is usually done by pressing down on the edges of the back plate, or by unscrewing several screws around the perimeter of the device. Once the back is off, locate the speaker. It is usually located at the bottom of the phone, near the charging port.

Next, use a tiny screwdriver to unscrew the speaker from its housing. Once the screws are removed, gently pull the speaker away from the phone until it comes loose. Take note of the speaker’s orientation and position before removing it, as this will help when you install the new speaker.

Then, insert the new speaker into the old one’s position and carefully secure it with the screws. Make sure the new speaker is properly aligned with the holes and that all screws are tightened securely.

Finally, reassemble the phone and power it on. You can test the new speaker by playing a song or making a phone call. If the speaker is working properly, you have successfully replaced your damaged smartphone speaker. However, the location of the speaker may vary depending on the smartphone brand.


The first step to replacing a damaged battery is to acquire the correct replacement battery for your device. If you are unsure about the type, you can look up the make and model of the phone, or contact the manufacturer directly. Once you have the correct battery, you can begin the replacement process.

You will need a few tools in order to replace your battery, including a Phillips-head screwdriver, a spudger, and a pair of tweezers. You will also need to make sure that you have the correct replacement battery.

The first step is to remove the back panel of your phone, which is typically held in place by screws. Using the screwdriver, remove any screws that are holding the back panel in place. Once the panel is removed, you can locate the battery compartment.

Use the spudger to carefully remove the battery from its compartment. Be careful not to damage the connectors or components around the battery. Once the battery is removed, you can then insert the replacement battery. Make sure to line up the battery correctly, ensuring that all of the contacts are lined up with the phone’s battery compartment.

Once the battery is inserted, use the tweezers to reconnect any cables or connectors that were disconnected when the original battery was removed. Then, reassemble the phone using the original screws and place the back panel back in place.


As it is explained above, with proper tools and skills, you can easily replace any hardware component of your smartphone. However, if you are new to this, it is better to contact your smartphone repair service to fix the issue. Some of the most intricate components in the phone can easily be damaged if not handled carefully. So proceed with caution and good luck!


Posted on Leave a comment

How To Decide If I Should Repair Or Replace My Faulty Smartphone

What should you do to your faulty smartphone? Well, pones have become a critical part of our daily lives, and it’s hard to imagine life without one. Choosing a high-quality and durable smartphone can be challenging with so many brands available. The cost of these devices can be substantial, and they often break or become damaged, making it difficult to decide whether to repair or replace them. 

The decision often comes down to the repair cost compared to purchasing a new phone. However, expensive phones don’t always guarantee more extended durability, and accidental damage can still occur. This article will help you determine whether to repair or replace your faulty smartphone, so you can make an informed decision and avoid wasting money.

When to Repair or Replace Your Faulty Smartphone

Warranty Period

  • If your smartphone is still under warranty, you can have it replaced by the manufacturer. This is the most straightforward solution to a faulty smartphone.
  • If your warranty has expired, repair may be the next option.

Determining the Fault

  • To make an informed decision, you need to determine whether the fault is in the software or hardware of the smartphone.
  • You can try waiting a few days to see if the fault resolves.
  • If unsure, speak to a smartphone repair technician or a professional for further insight.


  • It is the most cost-effective solution if you can buy a new smartphone for the cost of repair.
  • However, some people may prefer to repair their phones due to sentimental attachment.

Age of the Smartphone

  • If your smartphone is more than 4 years old, you may experience software-related issues.
  • This is because the apps you use are constantly upgrading while your phone is aging.
  • In this case, you may buy a new smartphone, even if the repair cost is lower.

Considerations Before Deciding Anything About Your Faulty Smartphone 

Aside from the warranty period, cost-effectiveness, and age of the smartphone, there are other considerations you should consider when deciding whether to repair or replace your device.

The severity of the Fault: If the fault is in a critical area, such as the hardware, memory, or battery, it may not be worth attempting a repair. On the other hand, repair may be viable if the issue is with a less critical component.

Availability of Parts: If the parts needed for the repair are not readily available, it may be difficult or expensive to fix the phone.

The expertise of the Technician: The expertise and reputation of the repair technician should also be considered. If you have a valuable or high-end smartphone, you may want to choose a reputable and experienced technician to avoid further damage.

Personal Preference: Your preference should also play a role in your decision. If you have a sentimental attachment to your smartphone, you may choose to repair it even if it is not the most cost-effective option.

Considering these factors, you can make an informed decision and ensure that you get the most value out of your smartphone.


In conclusion, the decision to repair or replace your smartphone is a personal one that depends on various factors such as your budget, the age of the phone, and the level of damage. If you are on a tight budget and your phone is still under warranty, getting it repaired or replaced by the manufacturer may be the best option. 

However, if you have a steady income and the repair cost is higher or medium, investing in a new phone may be the most cost-effective solution in the long run. It’s essential to weigh your options carefully and consider the value of your phone in terms of sentimental attachment and usability. 

In times of need, services like Fixsmart can assist you in making the best decision for your specific situation.